Cisco ASR 1000 series Hardware Installation Manual page 284

Connecting Power to the Cisco ASR 1002-F Router
Connecting AC Input Power to the Cisco ASR 1002-F Router
This section provides instructions for installing the AC power supply into the Cisco ASR 1002-F Router.
shows the AC power supply labels.
Figure 9-23
1
0
1
2
3
4
To connect AC power to the Cisco ASR 1002-F Router, follow these steps:
Step 1 At the rear of the router, check that the power switch is in the Off (O) position.
Insert the AC power cable into the power supply AC inlet.
Step 2
To ensure that the AC power cord does not interfere with other cables or wires, dress the AC power cable
Step 3
in one of the following ways:
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
9-30
Cisco ASR 1002-F Router AC Power Supply Labels
2 3 4
OUTPUT INPUT FAN
FAIL OK OK
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
8
Chassis ESD socket
AC power supply slot 0 label
AC power supply On (|) /Off (O) switch
AC power supply LEDs
Chapter 9
Figure 9-23 shows the Cisco ASR 1002-F Router AC power supply.
5 6
5 Fan
6 Captive installation screw
7
AC power supply slot 1 label
8
AC power inlet
Cisco ASR 1002-F Router Overview and Installation
OUTPUT INPUT FAN
FAIL OK OK
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
1
7
OL-13208-11