Makita DHS710 Instruction Manual
Cordless circular saw
Hide thumbs
Also See for DHS710:
- Instruction manual (85 pages) ,
- Instruction manual (19 pages) ,
- Instruction manual (72 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita DHS710
Summary of Contents for Makita DHS710
- Page 1 INSTRUCTION MANUAL Cordless Circular Saw DHS710 014203 IMPORTANT: Read Before Using.
-
Page 2: Specifications
With the times when the tool is switched off and when it appropriate Makita genuine saw blades, other materials is running idle in addition to the trigger time). can also be sawed. -
Page 3: General Power Tool Safety Warnings
EC Declaration of Conformity refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Makita declares that the following Machine(s): Do not expose power tools to rain or wet Designation of Machine: conditions. Water entering a power tool will Cordless Circular Saw increase the risk of electric shock. - Page 4 Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical power tool will do the job better and safer at the replacement parts.
- Page 5 Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control. Never damaged incorrect blade washers or bolt. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.
- Page 6 Additional safety warnings 23. Use extra caution when cutting damp wood, pressure treated lumber, or wood containing knots. Maintain smooth advancement of tool without decrease in blade speed to avoid overheating the blade tips. 24. Do not attempt to remove cut material when blade is moving.
- Page 7 If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. Do not short the battery cartridge: Do not touch the terminals with any conductive material. Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
-
Page 8: Functional Description
Tool / battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a tool/battery protection system. This system automatically cuts off power to the CAUTION: motor to extend tool and battery life. Always be sure that the tool is switched off and the •... -
Page 9: Bevel Cutting
Adjusting depth of cut 1. Stopper 0-45 0-50 1. Lever 014209 Use the 45° stopper when you do precise 45° angle cutting. 014206 Turn the stopper clockwise fully for bevel cut (0° - 45°) and CAUTION: turn it counterclockwise for 0° - 50° bevel cuts. After adjusting the depth of cut, always tighten the •... - Page 10 Be sure the blade is installed with teeth pointing • up at the front of the tool. 014213 Use only the Makita wrench to install or remove • When changing blade, make sure to also clean upper the blade. and lower blade guards of accumulated sawdust. Such efforts do not, however, replace the need to check lower 1.
-
Page 11: Operation
(Guide rule) 014216 When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Install 014218 The handy rip fence allows you to do extra-accurate the dust nozzle on the tool using the screw. Then straight cuts. -
Page 12: Maintenance
If electric brake is not working well, ask your local Makita service center for repair. Adjusting for parallelism To maintain product SAFETY and RELIABILITY, repairs, 1. -
Page 13: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Saw blades • Rip fence (Guide rule) • Guide rail •... - Page 16 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885247C221...