Table of Contents
Advertisement
8 CONTRAST
Press ESC, then 7 button. The following display appears.
According to this display,
change the contrast value from
00 to 1F using Cursor keys.
Doing so, brightness of display
changes from dark to light, and
then from light to dim. The con-
trast is best with default con-
trast value 10.
9 PATTERN-6
Press ESC, then 8 button. The following display appears.
@ PATTERN-7
Press ESC, then 9 button. The following display appears.
REVERSED STRIPE
A Press ESC button twice. Doing so, TEST MENU display appears.
5-2-2. MEMORY CHECK
1 Pressing 2 button, the following MEMORY MENU appears.
# # # MEMORY MENU # # #
1 SRAM MEMORY CHECK
2 CHECK SUM
3 BUS CHECK
4 SRAM WRITE CHECK
5 SRAM READ CHECK
6 FLASH CROSS BIT CHECK
7 FLASH CROSS BIT CHECK F
Touch [ESC] Hard lcon Them Test END
STRIPE
SHIFT
CAPS
ACC
COMMAND
SEARCH
— 32 —
<Contrast Check>
Touch [<-] Key Then [DRANK]
Touch [->] Key Then [THIN] ( [LIGHT] )
<< DARK
<- +
->
THIN(LIGHT) >>
Contrast Value :
10
Hide quick links:
Advertisement
Table of Contents
