Casio BN-10 Service Manual & Parts List page 26

3. With the side marked CASIO facing up (so you can see it), plug the Mini Cradle connector straight
into the BN Unit port.
Important!
• Make sure you insert the connector as far as it will go, until you hear it snap securely into place.
• Do not apply undue force! Doing so can damage the Mini Cradle connector or BN Unit port.
To disconnect the Mini Cradle from the CASIO BN Unit
1. Make sure that the power of both the BN Unit and your computer is turned off.
2. While squeezing the buttons on both sides of the connector, pull it straight out from the Mini
Cradle port to remove it.
Squeeze here
3. Close the BN Unit´s port cover.
— 26 —