Operation Check - Casio BN-10 Service Manual & Parts List

5-2. Operation Check

Three items (5. OPTION CHECK/ 6. CRADLE CHECK/ 7. MODEM CHECK) in these nine test items
can not be executed for the following reasons.
5. OPTION CHECK- This check can not be performed now, because data transfer between BN
Units don't exist and the jack (3 pin) on Main PC board for this data transfer
don't exist also.
6. CRADLE CHECK- The special jigs are necessary to perform this check.
Check data transfer between BN Unit and PC referring to 4. DATA COMMU-
NICATION of this manual.
7. MODEM CHECK- The MODEM BW-100 is necessary for this check. But formal MODEM BW-
100 don't exist now. After the formal marketed BW-100 appears, the techni-
cal information for BW-100 will be supplied.
5-2-1. DISPLAY CHECK
1 Press 1 button. The following display appears.
### DISPLAY MENU ###
1 PATTERN-1
2 PATTERN-2
...............................
8 PATTERN-6
9 PATTERN-7
2 PATTERN-1
Press 1 button. The following display appears.
3 PATTERN-2
Press ESC, then 2 button. The following display appears.
REVERSED CHECKER
CHECKER
CAPS
ACC
COMMAND
SEARCH
SHIFT
— 30 —