Installing Your Router; Hardware Installation - Draytek Vigor2830N Quick Start Manual

2 . I n s t a l l i n
2 . I n s t a l l i n
This section will guide you to install the router through hardware connection
and configure the router's settings through web browser.
2 . 1 H a r d w a
2 . 1 H a r d w a
Before starting to configure the router, you have to connect your devices
correctly.
1. Use one end of the DSL line cable to DSL port on the router to the land
line jack on the wall for accessing Internet.
2. Or, you can connect the WAN1 interface to the Cable/DSL Modem or
media converter for accessing Internet.
3. Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports
of the router and the other end of the cable (RJ-45) into the Ethernet
port on your computer.
4. Connect one end of the power adapter to the router's power port on the
rear panel, and the other side into a wall outlet.
5. Power on the device by pressing down the power switch on the rear
panel.
6. The system starts to initiate. After completing the system test, the ACT
LED will light up and start blinking.
.
g Y o u r R o
g Y o u r R o
r e I n s t a l l a t i
r e I n s t a l l a t i
u t e r
u t e r
o n
o n
5
Vigor2830n V2 Quick Start Guide