Draytek Vigor2830N Quick Start Manual page 11

Left LED
WAN2
(Green)
(Giga)
Right LED
(Green)
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB
DSL
WAN2(Giga)
GigaLAN
(1-4)
PWR
ON/OFF
Off
On
Off
Blinking
On
Off
Description
Press "Wireless LAN ON/OFF/WPS" button once to
wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to
enable (WLAN LED on) or disable (WLAN LED off)
wireless connection.
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED
begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default
configuration.
Connecter for a USB device (for 3G/4G USB Modem or
printer).
Connecter for accessing the Internet through ADSL2/2+.
Connecter for remote network devices.
Connecters for local network devices.
Connecter for a power adapter.
Power Switch.
3
The port is disconnected with
10/100Mbps when left LED is on.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with
1000Mbps.
The port is disconnected with
10/100Mbps when left LED is on.
Vigor2830n V2 Quick Start Guide