Connecting Via Activesync - Casio DT-X8 Series Quick Start Manual

7.3.3 Connecting via ActiveSync

If debugging with the Device Emulator is carried out in Visual Studio 2008 or Visual Studio 2005,
or transmission/reception of a file with the Device Emulator is carried out, ActiveSync must be
used.
Setting ActiveSync
1. Start up ActiveSync and then navigate to File
Figure 7.13
2. In Connection Settings screen, check in the Allow connections to one of the following
box and choose DMA in the pull-down menu. See Figure 7.14.
Figure 7.14
Connection Settings ....
55