Using The Voice Message Center - Honeywell VISTA-20PSeries User Manual

Paging Feature
• If programmed, the system can automatically send certain system condition
messages to up to four (VISTA-20P/PS Series) or two (VISTA-15P Series) pagers.
• The display consists of code numbers that indicate the type of condition that has
occurred.
Scheduling
• Your system can be programmed to automatically perform certain functions (e.g.,
arm the system) at a predetermined time each day.

Using the Voice Message Center

Voice keypads feature a voice message
center that lets you record and playback
one message.
• The message can be up to 2.5-minutes
long
• The message remains in the Keypad's
memory until
recorded.
• The volume control of the message is
adjustable.
• Refer to the procedures below when
using the Message Center functions.
Message Center Functions
To...
record a
message
end
recording
play a
message
adjust the
volume
a new message
Press these keys...
# 0 1
+ +
FUNCTION VOICE RECORD
1
OFF
RECORD
# 0 3
+ +
FUNCTION VOICE
# 0 2
+ +
FUNCTION VOICE
volume key [3] ↑ (up) or [6] ↓ (down)
System Overview
SPEAKER
ARMED
is
LEDs
READY
MESSAGE
MIC
MICROPHONE
Notes...
The red MESSAGE LED lights.
OFF
Message remains in memory
until a new message is recorded.
The red MESSAGE LED flashes,
indicating message waiting.
The recorded message plays and
STAY
the red MESSAGE LED turns
off.
PLAY
Adjusting message volume also
AWAY
adjusts status volume. Volume
, then press
cannot be adjusted while
VOLUME
playing.
(cont'd)
LCD
DISPLAY
1 2 3
OFF AWAY STAY
RECORD VOLUME PLAY
4 5 6
MAX TEST BYPASS
7 8 9
INSTANT CODE CHIME
0 #
READY
STATUS VOICE FUNCTION
FUNCTION
KEYS
– 7 –