Honeywell VISTA-20PSeries User Manual page 47

THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS
1. Should you become aware of a fire emergency before your smoke or
Manually
heat detectors sense the problem, go to your nearest keypad and
Initiating
manually initiate an alarm by pressing the panic key assigned for
a Fire Alarm
FIRE emergency for 2 seconds (see below). If a key pair has been
assigned for fire, press both keys at the same time. See the Using
the Panic Keys section below for further details.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify
your local Fire Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the
alarm. The zone number(s) of the zone(s) in an alarm condition will
be displayed at the keypad.
A key or key pair may have been assigned for manually initiating a
Using the
FIRE alarm. See the Panic Keys section for key assignments.
Panic Key(s)
For convenience, indicate the key or key pair assigned for fire below.
Assigned for
In divi dua l Keys
FIRE
Emergency
A
O R
Key Pai rs
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
Fire Alarm System
B C
Press the individual key assigned for fire for 2 seconds.
✱
and
1
READY
OFF
✱
and
#
READY
and
3 #
STAY
* - 6 )   
ALPHA DISPLAY KEYPAD
Press both keys of the key pair
assigned for fire at the same time.

ALARM
FIRE
FIXED-WORD KEYPAD
(cont'd)
AC
– 47 –