Components - Honeywell HX3 Reference Manual

Components

1 Docking Bay
2 Left Battery Charging Bay
3 Tethered Ring Scanner Storage
Back Connectors - AC Power Port
4
and RS232 Serial Port
Note: Either battery charging bay can charge stand-alone or tethered Standard and Extended batteries.
The HX3 Cradle Connector is located on the bottom of device.
The HX2 Cradle is not certified for use in Hazardous Locations.
Note: The HX3 Voice mobile device can be docked in the HX2 labeled Cradle. The HX3 tethered battery can be recharged in
a powered HX2 labeled Cradle battery charging pocket.
5 Right Battery Charging Bay
6 Cradle Side Rails
7 HX2 Cradle Connector (power and I/O)
8 USB Port (USB-B Client)
9 USB Port (USB-A Host)
2-3