Table of Contents
Advertisement
Antenna
Tx Power
Channel Width
After finishing this web page configuration, please click OK to save the settings.
3
.
6
.
2
A
P
D
i
s
c
o
v
e
3
.
6
.
2
A
P
D
i
s
c
o
v
e
VigorAP 900 can scan all regulatory channels and find working APs in the neighborhood.
Based on the scanning result, users will know which channel is clean for usage. Also, it can
be used to facilitate finding an AP for a WDS link. Notice that during the scanning process
(about 5 seconds), no client is allowed to connect to VigorAP 900.
This page is used to scan the existence of the APs on the wireless LAN. Yet, only the AP
which is in the same channel of VigorAP 900 can be found. Please click Scan to discover all
the connected APs.
VigorAP 900 can be attached with two antennas to have good
data transmission via wireless connection. However, if you
have only one antenna attached, please choose 1T1R.
The default setting is the maximum (100%). Lower down the
value may degrade range and throughput of wireless.
20 MHZ- the device will use 20Mhz for data transmission
and receiving between the AP and the stations.
Auto 20/40 MHZ– the device will use 20Mhz or 40Mhz for
data transmission and receiving according to the station
capability. Such channel can increase the performance for
data transmission.
r
y
r
y
63
VigorAP 900 User's Guide
Advertisement
Table of Contents
