5.4.5
Data initialization through service operation
All the data can be initialized with the service data #8 clear operation.
For details on the initialization procedure and the data that is erased, see
Chapter 3: 5.2 Service Data Seffing on Page 3-31.
REFERENCE
"All clear" when nothing works.
On a rare occasion, the display may go blank and all the buttons may stop
_
working. Severe electrical noise and static can cause problems as well. In
such a case, use the "All clear" feature.
NOTE
After installing the unit for the first time and connecting the power cord,
execute "All clear." The procedure is described below.
(by service mode)
FUNCTION
1
Standby
(by special mode)
FUNCTION
START/COPY H Execute All cleat H Standby ]
5 times
START/COPY
START/COPY
Figure 1-24 All Clear
1-53
Chapter 1: General Description
START/COPY
Execute All clear
ALL CLEAR