c) Protecting the ink nozzles
Do not touch or wipe the ink nozzles with tissue paper, etc. Doing so can clog the nozzles.
If the head cap and protective tape have been removed and the BJ cartridge is not to be
installed immediately, store the cartridge properly to prevent the nozzles from drying out
and clogging.
Do not disassemble the BJ cartridge. Also, the BJ cartridge contains electronic circuitry.
Do not wash it with water.
Black BJ Cartridge
Figure l-17 Ink Path Cartridge
d) Ink conductivity
The BJ cartridge ink can conduct electricity. If ink has leaked onto any mechanical parts,
wipe off with a damp paper towel. If ink has leaked onto the circuit board, use tissue
paper and carefully wipe off the ink completely even at the base of the IC chips.
A
so may damage the circuit?.
Chapter 7: General Description
Color BJ Cartridge
Photo BJ Cartridge
1-39