Functional Description - Makita 6833 Instruction Manual

FUNCTIONAL
DESCRIPTION
1. Lock button
2. Switch trigger
1. Reversing switch
1. Hook
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
002629
1
CAUTION:
2
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
Reversing switch action
002636
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a complete stop.
1
Changing the direction of rotation before the tool stops may damage the
tool.
This tool has a reversing switch to change the direction of rotation. Press the
upper side (FWD side) of the reversing switch for clockwise rotation or the
lower side (REV side) of the reversing switch for counterclockwise rotation.
Hook
002648
The hook is convenient for hooking the tool to your belt. It can be installed on
either side of the tool. To remove it, pull it out in the direction of the arrow while
raising. To install the hook, push it down until it "clicks" into place on the tool.
1
5