3 Configuring the Storage System
Figure 3-9 Create Host Group
Step 3 Set the relevant parameters for the host group.
a host group.
Table 3-6 Parameters for creating a host group
Parameter
Host Group Name
OS
Step 4 Click OK. The Confirm dialog box is displayed.
Step 5 Click OK. The system displays "Operation succeeds".
----End
3.5 Adding a Host
The host displayed on the OSM3.0 interface is virtually created for easier management. It cannot
be mapped to a physical AS unless a port has been added to this virtual host.
Prerequisite
3-18
Description
This parameter indicates the name of the host group. When setting
this parameter, note that:
l
l
This parameter indicates the OS type of the hosts in the host group.
A host can install "Windows 2003", "Solaris", "HP UX", "AIX" and
"Linux".
NOTE
The system supports a maximum of 256 hosts.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-6
The name contains only letters, numbers, underscores (_), and
hyphens (-), and the first character cannot be a hyphen.
The name contains 1 to 32 characters.
OceanStor S5600 Storage System
Initial Configuration Guide
describes the parameters for creating
Issue 02 (2009-09-30)