Automatic Trunk-To-Trunk Transfer Target Setup - NEC Xen Topaz Programming Manual

IN
SA
24-04: A
SB
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Abbreviated Dial-
ling number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Input Data
Trunk Port Number
Abbreviated
Day/Night
Dial Area
Mode
Number
1-8
0-1999
Conditions
None
Feature Cross Reference
♦
Transfer
Telephone Programming Instructions
To enter data for Program 24-04 (Automatic Trunk-to-Trunk Transfer Target Setup):
1. Enter the programming mode.
2. Enter 24 04
24-04-01TrkPrt1
Mode1 ABB =1999
3. Enter the number of the item you want to program.
24-04-xxTrkPrtxx
xxxxx
4. Select Trunk port number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
Xen Topaz Programming Manual
T
UTOMATIC RUNK
Default
The destination of telephone number of the
Trunk-to-Trunk Transfer uses the number
1999 registered into the Abbreviated Dial. Use
this program to setup the Abbreviated Dial
area.
200
P 24: H
ROGRAM OLD
- -T T
TO RUNK RANSFER
1-51
Description
Program 21 to 25
/T S
RANSFER ETUP
T S
ARGET ETUP
Related
Program
11-10-8
13-04
24-05