System Options For Transfer - NEC Xen Topaz Programming Manual

Program 21 to 25
IN
SA
SB
Description
Use Program 24-02 : System Options for Transfer to define the system options for Transfer feature.
Input Data
Prog. No.
24-02-01
Busy Transfer
Use this option to prevent or allow extensions to
Transfer calls to busy extensions.
24-02-02 MOH or Ringback on Transferred Calls
Use this option to enable or disable MOH on
Transfer. If enabled (0), a transferred caller
hears MOH while their call rings the destination
extension.
If disabled (1), a transferred caller hears ring-
back while their call rings the destination exten-
sion.
24-02-03
Delayed Call Forwarding Time
If activated at an extension, Delayed Call For-
warding occurs after this interval. This also sets
how long a Transferred call waits at an exten-
sion
forwarded to Voice Mail before routing to the
called extension's mailbox.
24-02-04 Transfer Recall Time
An unanswered transferred call recalls to the
extension that initially transferred it after this
interval.
24-02-05
Message Wait Ring Interval Timer
For SLTs without message waiting lamps, this
timer determines the amount of time between
intermittent
ringing. If this timer is set to '0' then the system
rings once.
24-02-07
Forced release timer for Trunk-to-Trunk
Transfer. When 14-02-12 = 1 and 14-02-13 = 1
this timer is also used for Call Forward Off-
Premise.
24-02-08
Delayed transfer timer for all extension
groups
Conditions
None
Feature Cross Reference
♦
Transfer
P
ROGRAM
24-02: S
Item
24: H /T
OLD
O
YSTEM PTIONS FOR
Input Data
Default
0 : Disable
1 : Enable
0 : Hold Tone
1 : Ring Back
Tone
0-64800(Sec.)
0-64800(Sec.)
0-64800(Sec.)
0-64800(Sec.)
0=Off
0-64800(Sec.)
Xen Topaz Programming Manual
S
RANSFER ETUP
T
RANSFER
Related
Program
0
0
10
30
30
14-02-12
1800
14-02-13
10 11-11-28
11-11-29
15-07-59
197