Trunk Ring Tone Setup - NEC Xen Topaz Programming Manual

Program 21 to 25
IN
SA
SB COPY
Description
Use Program 22-03 : Trunk Ring Tone Setup to select the ring tone range for the trunk. The trunk uses a
ring tone within the range selected when it rings an extension. There are three ring tones available.
Input Data
Trunk Port Number
Ring Tone Pattern
0-2
（Ring Tone pattern 1-3）
Incoming Signal Frequency Pattern
0: Tone Pattern 1
1: Tone Pattern 2
2: Tone Pattern 3
Conditions
None
Feature Cross Reference
♦
Selectable Ring Tones
Telephone Programming Instructions
To enter data for Program 22-03(Trunk Ring Tone Setup):
1. Enter the programming mode.
2. Enter 22 03
22-03-01 Trunk1
Ring Tone Pat 0
3. Enter the number of the item you want to program.
22-03-xx Trunkxx
xxxxx
4. Select the trunk number to be programmed by pressing the FLASH or the VOLUME ▲ or VOLUME ▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you've exited that series' programming section.
P
ROGRAM
Default
Use this program to select the ring tone
range for the trunk. The trunk uses a ring
0 tone within the range selected when it
rings an extension. There are three ring
tones available.
Frequency
600/450/16Hz
450/16Hz
600Hz
22: I
NCOMING
22-03: T R
RUNK
1-51
Description
Xen Topaz Programming Manual
C S
ALL ETUP
T S
ING ONE ETUP
Related
Program
15-02
Modulation
FM
AM
173