Additional Safety Rules - Makita 2012NB Instruction Manual

ADDITIONAL SAFETY RULES
1. Wear eye protection.
2. Don't use the tool
in the presence o f flammable liquids or gases.
3.
Make sure that all covers are installed in place before operation.
4. Handle the blades very carefully.
5. Check the blades carefully for cracks or damage before operation.
Replace cracked or damaged blades immediately.
6. Tighten the planer blade installation bolts securely.
7. Remove nails and clean the workpiece before cutting. Nail, sand or foreign
8. Do not wear gloves during operation.
9.
Do not remove chips from the chip chute when the motor is running.
matter can cause blade damage.
Clean out chips after the blades come t o a complete stop. Always use
a
stick,
etc. when cleaning them out.
IO.
Do not leave the tool running.
11. Don't abuse cord. Never yank cord t o disconnect
it
from receptacle. Keep
cord away from heat, oil, water and sharp edges.
SAVE THESE INSTRUCTIONS.
4