Makita 2012NB Instruction Manual page 14

Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
the brush holder caps.
Lubrication
Oil the chain (after removing the side cover
R), the four columns and the screws for
elevating the main frame. This periodic
lubrication should be performed with
machine oil.
CAUTIO N :
Oiling and all maintenance should be done
with the tool turned off and unplugged.
Brush holder cap
- 1
Screwedriver
Column Screw
Cleaning
Always brush off dirt, chips and foreign matter adhering to the roller surfaces, motor vents
and drums.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjust-
ment should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
14