Specifications; Ec Declaration Of Conformity - Makita 2012NB Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Max. cutting depth
Feed rate (min
Table size (W x L)
No load speed (min
Overall length (W x L x H)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under
Model
Cutting width
-1
)
-1
)
Net weight
safety class
equipment and
3.0 mm of stock width less than 150 mm
1.5 mm of stock width from 150 mm to 240 mm
1.0 mm of stock width from 240 mm to 304 mm
END201-5
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.38 Ohms it can be
presumed that there will be no negative effects. The
mains socket used for this device must be protected with
a fuse or protective circuit breaker having slow tripping
characteristics.
Noise
The typical A-weighted noise level determined according
to EN61029:
Sound pressure level (L
Sound power level (L
its
Uncertainty (K) : 3 dB(A)
For European countries only

EC Declaration of Conformity

ENE001-1
We Makita
manufacturer declare that the following Makita
machine(s):
ENF002-1
Designation of Machine:
Thicknesser
Model No./ Type: 2012NB
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standard or standardized documents:
ENF100-1
EN12100-1, IEC61029, EN860
The EC
10-SKM-CM-0523
2
2012NB
304 mm
8.5 m
304 mm x 771 mm
8,500
483 mm x 771 mm x 401 mm
28.1 kg
/II
) : 86 dB(A)
pA
) : 99 dB(A)
WA
Wear ear protection
Corporation as
Type-Examination
ENG905-1
ENH037-1
the responsible
Certificate No.