Ethernet Configuration
Entering Advanced Configuration Information
Settings on the Ethernet Advanced Page
Requested Status
Cisco Aironet 1200 Series Access Point Software Configuration Guide
3-42
You use the Ethernet Advanced page to assign special configuration settings for
the access point's Ethernet port.
Figure 3-18 The Ethernet Advanced Page
Follow this link path to reach the Ethernet Advanced page:
1.
On the Summary Status page, click Setup.
2.
On the Setup page, click Advanced in the Ethernet row under Network Ports.
The Ethernet Advanced page contains the following settings:
Requested Status
•
•
Packet Forwarding
Default Unicast and Multicast Address Filters
•
Maximum Multicast Packets/Second
•
This setting is useful for troubleshooting problems on your network. Up, the
default setting, enables the Ethernet port for normal operation. Down disables the
access point's Ethernet port.
Figure 3-18
shows the Ethernet Advanced page.
Chapter 3
Configuration
OL-2159-01