Cisco Aironet 1200 Series Software Configuration Manual page 53

Chapter 3 Configuration
Note
Click Allowed to pass traffic to the MAC address or click Disallowed to discard
Step 3
traffic to the MAC address.
Click Add. The MAC address appears in the Existing MAC Address Filters list.
Step 4
To remove the MAC address from the list, select it and click Remove.
You can create a list of allowed MAC addresses on an authentication server on
Tip
your network. Consult the
page 4-28
If you intend to list allowed MAC addresses on an authentication server, select yes
for the Look up MAC Address on Authentication Server if not in Existing Filter
List option.
Click OK. You return automatically to the Setup page.
Step 5
Step 6 Click Advanced in the AP Radio row of the Network Ports section at the bottom
of the Setup page. The AP Radio Advanced page appears.
AP Radio Advanced page.
OL-2159-01
If you plan to disallow traffic to all MAC addresses except those you
specify as allowed, put your own MAC address in the list of allowed MAC
addresses. If you plan to disallow multicast traffic, add the broadcast
MAC address (ffffffffffff) to the list of allowed addresses.
"Setting Up MAC-Based Authentication" section on
for instructions on using MAC-based authentication.
Cisco Aironet 1200 Series Access Point Software Configuration Guide
Filter Setup
Figure 3-9 shows the
3-15