Filling With Rinse Aid - Baumatic BYDI630 User Manual

To alter the amount of salt that is released by the water softener, you
should:-
o Within 60 seconds of supplying power to the appliance, press
and hold the program button (4) for 5 seconds.
o The machine will enter the salt adjustment mode and the salt
and rinse aid warning lights will flicker.
o Use the program button (4) to set the correct water hardness
level, according to the table above. The number of times a
buzzer sounds indicates the selected level and at the same time
the relevant program lights will come on, as shown in the table
above.
o For example, if the machine buzzes 3 times and the Rapid and
Economy wash cycle lights come on simultaneously, this means
level H3 is set.
o After the desired level is displayed, release all buttons for 1
minute, or press the program button down for 3 seconds, and
the machine level will be set.
o IMPORTANT: If you are using 3 in 1 dishwasher tablets and live
in a medium or hard water area, then you should still fill the
water softener with salt.

Filling with rinse aid

The rinse aid is released during the final rinse and it helps
to prevent water from forming droplets on your dishes.
These droplets will lead to spots and streaks being left on
items after the wash program has completed.
o Your dishwasher is designed to utilise liquid rinse aid.
o The rinse aid dispenser is located inside the drop down door,
next to the detergent dispenser.
13