Selecting The Projection Quality (Selecting Color Mode) - Epson EB-485W User Manual

Adjusting Projected Images
• Press the [Volume] buttons on the remote control to adjust the volume.
[ ] Decreases the volume.
a
[ ] Increases the volume.
b
Remote control
• Adjust the volume from the Configuration menu.
Settings - Volume p.101
s
Caution
Do not start when the volume is set too high.
A sudden increase in volume may cause loss of hearing. Always lower the
volume before powering off, so that you can power on and then gradually
increase the volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Ideal for use in a bright room. This is the brightest
Dynamic
mode, and reproduces shadow tones well.
Application
http://www.pureglare.com.au
Mode
Ideal for making presentations using color materials
Presentation
in a bright room.
Theatre Ideal for watching films in a dark room. Gives
images a natural tone.
Ideal for projecting still pictures, such as photos, in
Photo *1
a bright room. The images are vivid and brought
into contrast.
*2 Ideal for watching TV programmes in a bright
Sports
room. The images are vivid and brought to life.
sRGB Ideal for images that conform to the sRGB
standard.
Even if you are projecting onto a blackboard
Blackboard
(greenboard), this setting gives your images a
natural tint, just like when projecting onto a screen.
Ideal for making presentations using a whiteboard.
Whiteboard
*1 This selection is only available when the input signal is RGB or when the
source is USB Display, USB, or LAN.
*2 This selection is only available when the input signal is component video, or
when the input source is Video or S-Video.
Each time you press the [Color Mode] button, the Color Mode name is
displayed on the screen and the Color Mode changes.
Remote control
51
Application
g
color