Adjusting Projected Images
Press the [Tele] or [Wide] buttons to correct horizontal distortion.
a
You can set H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
Using Remote Control
b
Select Keystone from Settings.
p.101
p.95
Using the Control Panel
http://www.pureglare.com.au
c
Select Quick Corner, and then press the [
d
Select the corner to correct using the [
buttons on the remote control, or the [
buttons on the control panel, and then press the [
46
] button.
], [
], [ ], and[ ]
], [
], [Wide], and [Tele]
w
v
] button.