Replacing The Remote Control Batteries - Epson EB-485W User Manual

Part Names and Functions
Name
• Stops the current function.
T
[Esc] button
• If pressed when the Configuration menu is displayed, it
moves to the previous level.
s "Using the Configuration Menu"
• Acts as a mouse's right button when using the Wireless
Mouse function.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)"
U
[Color Mode] button Each time the button is pressed, the color mode changes.
s "Selecting the Projection Quality (Selecting Color
Mode)"
V
[LAN] button Changes to the images projected with EasyMP Network
Projection. When projecting using the optional Quick
Wireless Connection USB Key, this button switches to
that image.
W
[USB] button Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB-A port
X
[Source Search] Switches to the image from the input port where video
signals are being input.
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
Y
Outputs remote control signals.
Remote control light-
emitting area
Function
p.95
p.70
p.51
p.40

Replacing the remote control batteries

If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
Safety Instructions
s
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old batteries with new batteries.
http://www.pureglare.com.au
18