Security Menu - Epson EB-485W User Manual

List of Functions
Sub-menu
(This can be set only if Connection Mode is set to Advanced.)
IP Settings
You can make network settings.
DHCP: Set to On to make network settings using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can input the IP address
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the subnet mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
To prevent the SSID
SSID Display
screen, set this to Off.
IP Address Dis‐ To prevent the IP address
play Standby screen, set this to Off.
Function
g
. If this
g
assigned to the
g
for the projector.
g
from being displayed on the LAN Standby
g
from being displayed on the LAN
http://www.pureglare.com.au

Security menu

g
Sub-menu
Select the security type from the items that are displayed.
Security
When setting security, follow the instructions from the
administrator of the network system you are about to access.
WEP Encryption You can set the encryption method for WEP encryption.
128Bit: Uses 128 (104) bit encoding.
64Bit: Uses 64 (40) bit encoding.
You can set the input method for the WEP encryption key to
Format
ASCII or HEX.
Key ID You can select the WEP encryption ID key.
109
Function