Honeywell Internet Connection Module Setup Manual page 10

Figure 3 - Device setup - port assignment
b. In the column headed "Device Name", enter the name you will use to
identify the device. If you leave the name blank, the default name defined
in the device file will be used. It is best to use a descriptive name that
includes the room or group if you plan to have more than one device of the
same type. The room name will simplify the group setup.
c. Click the Next button to submit the changes and return to the device
selection page. This will reset any prior configuration information for this
ICM, and may require the device to be configured again.
When all the devices in the list have been assigned, click the Next button to proceed
to device configuration.
Technical Support Setup - Guide
- Page 10 of 18 -