Back Panel - Buffalo AirStation Pro WAPS-APG600H User Manual

Back Panel

1
Power Connector
Connect the power adapter here.
2
Power Button
This button turns the power on and off .
3
LAN Ports
With Auto-MDIX, you can use straight or crossover Ethernet cables. LAN port 1 supports PoE.
4
EZ Analyzer Port
This port is reserved for the upcoming EZ Analyzer function. It is disabled for this firmware release.
5
USB Port
Connect a USB device here to upgrade firmware or save logs.
6
USB Eject Button
Before unplugging a USB device, hold down the USB eject button for 3 seconds. The USB LED will begin to blink.
Then you can unplug the USB device safely.
7
USB LED (Green)
On:
USB device is being used.
Randomly blinking:
USB device can be removed.
8
RJ-45 Serial Console Port for Settings
This port is reserved for additional functionality in the future. It is disabled for this firmware release.
9
Reset Button
To reset all settings, hold down this button until the diag LED comes on (about 3 seconds). Power must be on.
10
AOSS/WPS button
To start AOSS (or WPS), hold down this button until the wireless LED blinks twice (about 1 second).
11
Maintenance port
For factory use only.
9