Initial Setup; Setting The Airstation's Ip Address - Buffalo AirStation Pro WAPS-APG600H User Manual
11n/a & 11n/g/b concurrent or single-band smart model
Hide thumbs
Also See for AirStation Pro WAPS-APG600H:
- User manual (94 pages) ,
- User manual (105 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
Initial Setup
The AirStation Configuration Tool lets you configure your AirStation easily. Download it from one of the links below:
WAPS-APG600H:
http://d.buffalo.jp/waps-apg600h/
WAPS-AG300H:
http://d.buffalo.jp/waps-ag300h/
Note: The AirStation Configuration Tool is intended for use with a Windows computer with Internet Explorer 8.0 or
later installed. To configure the AirStation from a Mac or Linux computer, log in to Settings.
Setting the AirStation's IP Address
1
Start the AirStation Configuration Tool.
Click Start - All Programs - BUFFALO - AirStation Utility - AirStation Configuration Tool.
2
Click Next.
17
Hide quick links:
Advertisement
Table of Contents
