Attaching the Hand Strap
A flexible hand strap can be attached to the Handheld Printer Terminal.
Attach the hand strap following the procedure described below.
1. Attach Hook B of the hand strap to the
hand strap hook located on the bottom of
the Handheld Printer Terminal.
2. Pull on the hand strap in the direction
shown in the illustration, and then fasten
Hook A onto hook (
the Handheld Printer Terminal.
3. Fasten the wire of Hook A by inserting
into the indentation in the Handheld
Printer Terminal.
• Pull up on the center of the wire when
unfastening.
IT-3000_E_P15_31.p65
Hook A
Hand Strap
) on the back of
1
29
Hook B
1
1
* The illustration shows the IT-3000M53E
2005.3.29, 5:55 PM
E-29