Displaying And Switching The Image; Adjusting The Projector's Elevator; Operation - Hitachi CP-TW3003 User Manual

Adjusting the projector's elevator

The projector has 2pcs Rear foot for horizontals and inclinations. Spacers on
the each elevator foot are installed at the time of shipment, and projector is in a
condition to be able to just project. If necessary, detach the spacer, and the elevator
feet can be manually twisted to make more precise adjustments.
Spacer
WARNING
to let them swallow the spacers. If swallowed, consult a physician immediately
for emergency treatment.
NOTE
The adjustment angle can be adjusted up to plus or minus 1° each
of foot.
After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
If change the setting place of the projector, it will recommend keep and reuse the
spacers.

Operation

INPUT button
FOCUS - button
FOCUS + button

Displaying and switching the image

Press the INPUT button. Each time you press the button, the projector switches
its input port in turn. You can also use the remote control to select an input signal.
Rear foot
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
FOCUS D-ZOOM
PAGE MAGNIFY MYBUTTON VOLUME
UP ON
DOWN OFF
KEYSTONE/
PERFECT FIT TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
13
-1~1°
-1~1°
Rear foot
INPUT button