Image Menu - Hitachi CP-X440J User Manual

Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
H PHASE
28
Using the buttons ▲/▼ switches the mode for aspect ratio.
For an RGB signal
4:3  16:9  NORMAL
For For a For a video signal / no signal
4:3  16:9  SMALL
• The NORMAL mode keeps the original aspect ratio of the signal.
• For an HDTV signal of 1125i (1080i) or 750p (720p) as the
COMPONENT VIDEO input, this item can't be selected.
• Performing the automatic adjustment initializes the aspect ratio
setting.
Using the buttons ▲/▼ adjusts the over-scan ratio.
Large (It reduces picture)  Small (It magnifi es picture)
• This item can be selected only for a video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the buttons ▲/▼ adjusts the vertical position.
Up  Down
Using the buttons ▲/▼ adjusts the horizontal position.
Left  Right
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
fl icker.
Right  Left
• This item can be selected only for an RGB signal or a component
video signal. Note that this does not work with the input signal of
525i(480i)/625i(576i) from the component video port.
MENU [RGB]
Description
:SELECT
PICTURE ASPECT 4:3
IMAGE OVER SCAN 5
V POSITION 25
INPUT
H POSITION 142
SETUP
H PHASE 16
SCREEN
H SIZE 1344
OPTION
AUTO ADJUST EXECUTE
EASY MENU