Fastening The Adapter Cover - Hitachi CP-TW3003 User Manual

Connecting with your devices (continued)
CAUTION
is required to use the wireless network function of this projector.
off the power of the projector and pull out the power cord's plug from the outlet.
NOTICE
ports of the projector are recessed.
NOTE
microphone away from the speaker.

Fastening the adapter cover

Use the supplied adapter cover to prevent the
off easily and prevention from burn injury.
Loosen the screw (marked with triangle)
1.
on the bottom left of the USB TYPE A port.
Insert the tab of the cover into the hole
2.
at the upper right of the USB TYPE A
port in the direction of the arrow.
Align the screw holes on the projector
3.
and the cover. Then insert the screw
removed from the projector into the hole
and tighten the screw.
WARNING
burns disconnect the projector power cord for more than 5min. before touching it.
1
3
7
2
Tab