1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-TW3003
  6. User manual

Hitachi CP-TW3003 User Manual

Hide thumbs Also See for CP-TW3003:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
CP-TW2503/CP-TW3003
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
WARNING
product. See the "Using the CD manual" (
After reading them, store them in a safe place for future reference.
NOTE
manuals" means all the documents provided with this product, and "the product"
means this projector and all the accessories came with the projector.
Contents
............................................ 2
Important safety instruction ..............................2
Regulatory notices .............................. 3
Contents of package........................... 4
Arrangement ....................................... 5
Connecting power supply ................... 8
Using the cable cover ......................... 9
21) to read the manuals in the CD.
Turning on the power ........................ 12
Operation .......................................... 13
Turning off the power ........................ 15
3
Replacing the lamp ........................... 16
and camera lens ............................ 19
Using the CD manual ....................... 21
1
................................... 22
.. 18

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-TW3003

Summary of Contents for Hitachi CP-TW3003

  • Page 1: Table Of Contents

    Projector CP-TW2503/CP-TW3003 User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING 21) to read the manuals in the CD. product. See the “Using the CD manual” ( After reading them, store them in a safe place for future reference.

  • Page 2: First Of All

    First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.

  • Page 3: Regulatory Notices

    Declaration of Conformity Trade name HITACHI Model Number CP-TW2503, CP-TW3003 Responsible Party Hitachi America, Ltd. Address U.S.A. Telephone Number +1 -800-448-2244 to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has...

  • Page 4: About Waste Electrical And Electronic Equipment

    Regulatory notices (continued) About Waste Electrical and Electronic Equipment The mark is in compliance with the Waste Electrical and Electronic The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available.

  • Page 5: Arrangement

    Arrangement Refer to tables T-1 F-1 and F-2 at the end of this manual to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen. Screen size (diagonal) Projection distance (±8%) Screen height (±8%) b1 , b2 22) and service may be required.

  • Page 6: Connecting With Your Devices

    Arrangement (continued) Connecting with your devices Make sure that all the devices are suitable to be connected with this product, and F-3 to F-6 at the back of this manual. COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu, that port will accept component video signals. LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable.

  • Page 7: Fastening The Adapter Cover

    Connecting with your devices (continued) CAUTION is required to use the wireless network function of this projector. off the power of the projector and pull out the power cord’s plug from the outlet. NOTICE ports of the projector are recessed. NOTE microphone away from the speaker.

  • Page 8: Connecting Power Supply

    Connecting power supply Put the connector of the power cord into the AC (AC inlet) of the projector. outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER ON function activated, the connection of the power supply make the projector turn on.

  • Page 9: Using The Cable Cover

    Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Insert the three knobs on the cable cover into the knobs Pass the cables through the holes on the bottom of the cable cover. screw CAUTION prevent damage to the cables.

  • Page 10: Preparing For The Remote Control

    Remove the battery cover. Align and insert the two AA batteries ) according to their HITACHI MAXELL , Part No.LR6 or R6P plus and minus terminals as indicated in the remote control. Put the battery cover back to the former state.

  • Page 11: Preparing For The Interactive Pen

    As illustrated in the diagram, insert the AAA battery into the battery cover with the - end facing the front. (HITACHI MAXELL, Part No. LR03) Attach the battery cover by turning it to the right until it is completely closed.

  • Page 12: Turning On The Power

    Turning on the power STANDBY/ON button POWER indicator and correctly connected to the projector and the outlet. Make sure that the POWER indicator is steady orange. Press the STANDBY/ON button on the INPUT CALIBRATION projector or the remote control. ASPECT AUTO ACCENTUALIZER HDCR FOCUS...

  • Page 13: Displaying And Switching The Image

    Adjusting the projector's elevator The projector has 2pcs Rear foot for horizontals and inclinations. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.

  • Page 14: Selecting An Aspect Ratio

    Focusing ASPECT button Use the FOCUS + and FOCUS - buttons on FOCUS - button INPUT CALIBRATION the projector or remote control to adjust the FOCUS + button ASPECT AUTO ACCENTUALIZER HDCR screen focus. D-ZOOM D-ZOOM - button FOCUS PAGE VOLUME MAGNIFY MYBUTTON...

  • Page 15: Turning Off The Power

    Operation (continued) NOTE The ASPECT button does not work when no proper signal is inputted. an operation is made. This is not a malfunction. Turning off the power STANDBY/ON button Press the STANDBY/ON button on the POWER indicator projector or the remote control. The message “Power off?”...

  • Page 16: Replacing The Lamp

    Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number. Type number : DT01411 <CP-TW2503/CP-TW3003> lamp cover Turn the projector off, and unplug the power cord.
  • Page 17 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
  • Page 18 as possible. Type number : UX37191 come together with a replacement lamp for this projector. Turn the projector off, and unplug the power cord. Allow cover. It is recommended to leave the coarse meshed Intake vent or heavily soiled, replace them with new ones. turning its stitched side up.

  • Page 19: Caring For The Projection Window And Camera Lens

    Caring for the projection window and camera lens of display quality. Please take care of the projection window, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet. And cool the projector down by leaving it for a while as it is.

  • Page 20: Replacing The Internal Clock Battery

    CLOSE lightly on the battery since it may pop out of the holder. Replace the battery with a new HITACHI MAXELL, Part No.CR2032 or CR2032H. Slide the battery in under the plastic claw, and push it into the holder until it clicks.

  • Page 21: Using The Cd Manual

    Using the CD manual The other manuals for this product are written into the included CD-ROM titled to ensure the proper use. System requirements The system for using the CD-ROM requires the following. Windows ® OS:Microsoft ® Windows ® ® , Windows ®...
  • Page 22 Item Product name Liquid crystal projector Liquid Crystal Panel 1,024,000 pixels (1280 horizontal x 800 vertical) Lamp 250W UHP Speaker Power supply Power consumption 0 ~ 40°C (Operating) Temperature range 35 ~ 40°C (The brightness of the lamp is reduced automatically.) 377 (W) x 136 (H) x 360 (D) mm Size * Not including protruding parts.

  • Page 23: Troubleshooting - Warranty And After-Service

    HDMI Licensing LLC in the United States and other countries. ® is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries. All other trademarks are the properties of their respective owners.

This manual is also suitable for:

Cp-tw2503

Table of Contents