Control Operating Instructions - Maytag LAT2300 Service Manual

CONTROL OPERATING INSTRUCTIONS
Features may vary according to model
•
"
LAT9904
Washer Operating Instructions
Pressing one of the nine Program keys
powers up the control, and initiates the
selected program. All other washer
keys are inoperable until a program
selection is made. (When a pad is
properly pressed, an audible tone will
be heard and a red indicator will light.)
The pre-programmed wash cycles auto-
matically provide warm water washes
,
cold water rinses and extra large water
levels.
Cycle selection can be changed while
the washer is filling by pressing another
cycle pad. After the fill is complete, the
cycle cannot be changed. If the pre-
programmed options are not appro-
priate for the load:
• Change the wash temperature by
pressing the WASH TEMP ADJUST
pad.
16001145
• Change the load size by pressing the
WATER LEVEL ADJUST pad.
• Change the wash time by pressing the
TIME ADJUST pad -
T
to decrease
time or .. to increase time.
• Select other desired options by
pressing the appropriate pads.
Select the Wash Program or Cycle
If a previous load has not been
removed, the washer will not acknowl-
edge the cycle selection. The word
"lid" will appear in the monitor. To con-
tinue, the lid must be raised and
lowered and the wash cycle re-
selected.
For Regular Fabrics, press the center of
the "Regular" pad. After a slight pause,
the washer will immediately begin
filling and automatically select an
"Extra Large" Water Level, Warm
Wash/Cold Rinse and 10 minutes of agi-
tation. ("10" will appear in the Digital
Display.)
SECTION 2. CONTROLS
2·4
©1994 Maytag Corporation