Spin - Maytag LAT2300 Service Manual

Spin
When the motor reverses, the pulley will turn in the direction shown in Drawing 2.
This causes the pulley (A) and bearing (E) to turn. The pulley climbs the threads on
the helical drive shaft (B) overcoming the force of the brake spring (J) and lifts the
brake rotor (G) and brake shoe off the brake drum (I).
Bevel Gear Washer
"0" R'
0 -
lng
Bevel Gear
Brake Housing
E
G J B
' P i n
Lower Collar
.---
Agitator Shaft
r
Retainer Spring
Co,er Plate
~
./+-_.----
Damper
Pinion Gear
/ / Outer Race
Clutch Plate Washer / Spin Bearing
Splined Washer Brake Drum (I)
Torque Block and Yoke
ALL DARK SHADES ARE
STATIONARY COMPONENTS;
ALL LIGHT SHADES ARE
MOVING COMPONENTS
DRAWING 2
16001145 SECTION 3. WASHER - SERVICE PROCEDURES
3-41
©1994 Maytag Corporation