Section 2. Controls - Maytag LAT2300 Service Manual

SECTION 2. CONTROLS
The following charts illustrate a brief overview of each model series and the cycle
functions of operation sequence. Refer to wiring diagram supplied with unit for
testing.
• Agitation and soak times will vary with the number of minutes selected.
• Under certain conditions, the spray rinse may not occur.
Note: The washer will pause briefly throughout each cycle. These pauses are
normal.
A9824,A9804
PERMANENT PRESS FINE WASH PRE-SOAK REGULAR FABRICS EXTRA RINSE
Fill & Wash Fill & Wash Fill & Wash Fill & Wash Off or RII & Rinse
Cool Down Spi n Soak
Soak Spin Spin & Spray
Agitate Agitate Agitate Spin & Spray Spin
Spin
Spin Soak Spin
Fill & Rinse Spin & Spray Fill & Rinse
Spin & Spray Fill & Rinse Spin & Spray
Spin Spin & Spray Spin
Off Spin
Off
A8904,A8824,A8804,A6914
PERMANENT PRESS QUICK CYCLE PRESOAK REGULAR FABRICS EXTRA RINSE
Fill & Wash Fill & Wash Fill & Wash Fill & Wash Off or Fi II & Rinse
Cool Down Spi n
Spin
Pause Spin Spin & Spray
Fill & Agitate Spin & Spray Agitate Spin & Spray Spin
Spin Fill & Rinse Pause Spin
Fill & Rinse Spin & Spray Fill & Rinse
Spin & Spray Spin Spin & Spray
Spin Off
SUPER-WASH (8904)
Spin
Off
Fill & Wash
A9334,A8504,A8214,A8104,A8014,A7334,A3914,A2914
PERMANENT PRESS
DELICATES
INFINITE SOAK REGULAR FABRICS
Fill & Wash Fill & Agitate Fill & Wash Fill & Wash
Cool Down Pause Infi nite SoC!k
Spin
Fill & Agitate Agitate
Spin & Spray
Spin
Pause
Spin
Fill & Rinse Agitate Fill & Rinse
Spin & Spray Spin Spin & Spray
Spin Spin & Spray Spin
Off Fill & Rinse
Spin & Spray
Spin
Off
16001145 SECTION 2. CONTROLS
©1994 Maytag Corporation
2·1