Casio DT-X11M10E Quick Start Manual page 55

Notes:
1. The software is not required if your PC already has Visual Studio 2005 installed.
2. To use Microsoft Device Emulator 3.0, follow the steps below.
2-1. Install DT-X11 ExportSDK and Device Emulator of the DT-X11 SDK.
2-2. Download Microsoft Device Emulator 3.0 and install it.
2-3. Edit the following file and save the change.
C:\Program Files\Windows CE Tools\wce500\DT-X11\Emulation\DT-X11.cdes
Before you change, the default parameter in the file is described as follows.
module=DevEmu500.exe
Change the parameter to the one below. Be sure to describe the whole parameter in single one
line.
module=C:\Program Files\Microsoft Device Emulator\1.0\
DeviceEmulator.exe
You can substitute the Device Emulator Version 3.0 released in Visual Studio 2008 for an engine of
Device Emulator included in the DT-X11 SDK by the mentioned procedure above.
55