Casio DT-X11M10E Quick Start Manual page 38

3. Choose Yes, I want to restart my computer now. radio button, and then click Finish
button. Reboot your PC to set the IrXpress driver enabled.
Figure 5.22
Connect Bridge Satellite Cradle to Your PC
1. On the base of the Bridge Satellite Cradle you will find a bank of DIP switches. Ensure that
switch no. 6 is in the ON position to enable USB connection. If you change the switch settings,
ensure that you power off and then on again so that the settings take effect.
2. Insert the client end of the USB cable into the USB port on the Bridge Satellite Cradle.
3. Insert the host end of the USB cable into a USB port on your PC.
4. The hardware will be detected and configured automatically.
Establish Connection to Your PC
For detailed explanation on establishing connection, see the procedure Establish Connection to
Your PC in Chapter 5.2.1 "Via Direct IrDA" on page 28.
Establish Partnership
For detailed explanation on establishing the partnership, see the procedure Establish Partnership
in Chapter 5.2.1 "Via Direct IrDA" on page 31.
38