Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Front Base, Base (rear)
ASSEMBLING
3) Adjust the level of Bases as illustrated in Figs. 17 and 18.
Fig. 17
Attach Rule to Base (rear) as illustrated in Fig. 17F and turn Knob cover clockwise until Front base
contacts the rule completely as illustrated in Fig. 17R.
Planing depth will be set at zero level by the above adjustment.
Knob cover
Front base
Fig. 17F
Drum
Front base
Fig. 18
M10 Hex Nut that has been adjusted
to the position of 0mm planing depth.
Align the indication "0" on Knob to the triangle mark on Main frame complete,
while holding M10 Hex nut with Knob cover so as not to move.
(4) Set Retaining ring S-8 in place. And install Knob cover by pressing to Knob as illustrated in Fig. 19.
Fig. 19
Retaining ring S-8
M10 Hex nut
Knob
Rule
Base (rear)
Base (rear)
Knob
Thread portion
of Front base
Fig. 17R
Drum
Front base
Knob cover functioning
as Socket wrench temporarily
P 7/ 8
Base (rear)
Advertisement
