Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Front base, Base (rear)
DISASSEMBLING
(1) Front base and Bas (rear) can be removed as illustrated in Fig. 15.
Fig. 15
Remove Knob cover by levering up
with 1R263.
Retaining ring S-8, M10 Hex nut and
thread portion of Front base come
into sight.
1R263
Knob cover
Knob
Front base can be removed as illustrated below.
Compression spring 18
Knob
ASSEMBLING
1) Assemble Foot to Base (rear) before assembling Base to Main frame as illustrated in Fig. 16.
2) Assemble the Base with Foot to Main frame. And assemble Front base section to Main frame complete.
No need to assemble retaining ring S-8 to thread portion of Front base in this step. Refer to Fig. 15.
Fig. 16
Pass the long pin of Foot through Torsion spring 7.
Torsion spring 7
Hook this tail
with Foot.
Remove Retaining ring S-8
with 1R004 from thread portion
of Front base.
Retaining ring S-8
1R263
M10 Hex nut
Knob
Front base
Base (rear)
Long pin
of Foot
Foot
Use Knob cover as a socket wrench
temporarily for removing M10 Hex nut.
Turn Knob cover counterclockwise
while fixing Knob by hand.
M10 Hex nut can be removed from
the thread of Front base.
Thread portion
of Front base
Knob
Remove Base (rear) by unscrewing four 4x18
Tapping screws.
4x18 Tapping
screw (4pcs.)
Hook this tail with
Base (rear).
P 6/ 8
Knob cover
M10 Hex nut
Base (rear)
Foot can be removed
in separating Base from
Main frame complete.
Foot
Advertisement
