Station Hunting-Terminal - Philips Sopho 2000 IPS User Manual

STATION HUNTING-TERMINAL

PROGRAMMING
START
CM18 To set up each Station Hunting group, assign
station numbers, one by one, as shown below.
1st Operation
2nd Operation
Assign the pilot station to required station
number within the Hunting group.
For the member stations, set the data to "0".
NOTE:
CM08 Allow or restrict the ability to set Station Hunt-
ing-Terminal for a station with Do Not Disturb
set.
END
DESCRIPTION
(1) Station A
(2) Station B
(1) Station B
(2) Station C
The maximum number of stations
that can be included on one Station
Hunting group is 60 including the
Pilot Station.
And there is no limit to the number
of Terminal Hunt groups within the
system.
• Y=0
(1) X-XXXXXXXX: Station No. to be includ-
(2) X-XXXXXXXX: Another Station No. to
• Y=1
(1) X-XXXXXXXX: Station No.
(2) 0 : Member Station
1 : Pilot Station
(1) 240
(2) 0 : Allow
1 : Restricted
– 613 –
STATION HUNTING
STATION HUNTING-TERMINAL
DATA
ed in Station Hunting
Group
be included in the Same
Hunting Group
NWA-008845-001 Rev.5.0
32ch1010.fm