Code Restriction - Philips Sopho 2000 IPS User Manual

CODE RESTRICTION

PROGRAMMING
START
CM08 Provide the system with the Tol1 Restriction
feature for an outgoing call by System Speed
Dialing/Station Speed Dialing, if desired.
Provide the system with Toll Diversion or Toll
Denial.
CM12 Assign a Trunk Restriction Class to each
station.
CM35 Assign the data for Dial Pulse sending to the
Route number assigned.
Provide the Toll Restriction feature to the
required trunk routes.
Specify outgoing route access capability for
each restriction class.
A
DESCRIPTION
(1) 035: Station Speed Dialing
(2) 0 : Not provided
1 : To provide
(1) 044: System Speed Dialing
(2) 0 : Not provided
1 : To provide
(1) 119
(2) 0 : Toll Diversion (Routed to the "ICPT"
key on the DESKCON)
1 : Toll Denial (Routed to Reorder Tone)
• Y=01
(1) X-XXXXXXXX: Station No.
(2) X Z: Trunk Restriction Class
X: 1-8: In Day Mode
Z : 1-8: In Night Mode
• Y=08 Dial Pulse Sending
(1) 00-63: Trunk Route No.
(2) 3 : To send
• Y=11
(1) 00-63: Trunk Route No. (00)
(2) 0: To provide
• Y=51-58
(1) 00-63: Trunk Route No.
(2) 0 : Restricted
1 : Allow
– 214 –
CODE RESTRICTION
DATA
1 : Unrestricted (RCA)
2 : Non-Restricted 1 (RCB)
3 : Non-Restricted 2 (RCC)
4 : Semi-Restricted 1 (RCD)
5 : Semi-Restricted 2 (RCE)
6 : Restricted 1 (RCF)
7 : Restricted 2 (RCG)
8 : Fully-Restricted (RCH)
NWA-008845-001 Rev.5.0
32ch1004.fm