ViewSonic VT2216-L User Manual page 30

Using the TV Features
Customizing PC Display
Connect the PC and your TV using the VGA cable. See "Personal
Computer" on page 10.
1. Press INPUT to display the Source Select menu.
2. Press ▲ or ▼ to select PC, then press ENTER to confirm the
setting.
3. Press MENU to display the OSD main menu.
4. Press ◄ or ► to select Setup menu, then press ENTER to enter
the menu.
5. Press ▲ or ▼ to select PC Settings, then press ENTER to enter
its submenu.
6. Press ▲ or ▼ to select H-Pos, V-Pos, Clock,Phase or Auto,
and press ◄ or ► to adjust the setting.
7. Press EXIT to exit the menu.
Using USB Function
Your TV is equipped with a USB connector that enables you to view photos or listen to music stored
on a USB storage device.
j USB only supports JPEG and MP3 files.
Multimedia support format
Multimedia File
Categories Extension
Music *.mp3
Photo *.jpg
1. Plug a USB device to the USB connector on the rear side of the TV.
2. Press INPUT to display the Source Select menu.
3. Press ▲ or ▼ to select Media, then press ENTER to confirm the setting. The USB menu appears
on the screen.
4. Press ◄ or ► to select the menu item, then press ENTER.
5. Press EXIT to return to the previous screen.
Decoder
MPEG1 Audio LAYERIII
(Not corresponding MP3
Pro)
Baseline
PC Seettings
Photo
21
Notes
Sampling Frequency [KHz] : 32 / 44.1 / 48
Bit Rate [kbit/s]: 32 / 40 / 48 / 56 / 64 / 80 /
96 / 112 / 128 / 160 / 192 / 224 / 256 / 320
/ VBR
Horizontal Max: less than 5000
Vertical Max: less than 5000
Horizontal Min: greater than 8
Vertical Min: greater than 8
Music