Operation - ViewSonic VT2216-L User Manual

Using the TV Features

Operation

Turning the TV On and Off
Press on the remote control.
You can also use the
j If there is no input signal within 10 minutes, TV will be turned off
automatically.
Initial Setup
If an antenna or cable (without a cable box) is connected to your
TV's tuner, you will need to go through an INITIAL SETUP process
in order to watch the TV. The setup wizard will automatically start
when you first turn on the TV.
1. Press ◄ or ► button to select the Menu Language preference.
2. Press ▲ or ▼ button to select the options you want to adjust
and Press ◄ or ► button to change its value.
3. Press ◄ or ► buttons to select your connection type between
Air (antenna) or Cable and press ENTER to scan for channels.
4. The channel scan may take a while to complete, and after it is
done, the screen will return to the first found channel.
Please Note:
j The time setting on the TV will only keep accurate time if
you do not unplug or turn off standby power from the TV.
j Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
j The HDTV's tuner is designed for HDTV therefore requires a
stronger signal than normal TVs. If you cannot achieve that
signal level with your antenna or cable, your HDTV might lose
picture or sound.
j ViewSonic wants to help you save energy! This HDTV meets
the ENERGY STAR® guidelines under the default picture
setting called POWER SAVING. Changing this setting or
enabling other options will increase power consumption
which could possibly exceed the guidelines of ENERGY STAR®.
key on the front side of the panel.
14