Connecting To The Spa9000 Administration Web Server; Saving Or Discarding Changes Spa9000 - Linksys SPA9000 Administration Manual

a. Connect to the SPA9000 administration web server, and choose Admin access with
Advanced settings. (See
page 24).
b. Review the Router > Status page. The Software Version field should show the firmware
version that you installed.
NOTE: You may need to refresh your browser to display the updated page reflecting the
new version number.

Connecting to the SPA9000 Administration Web Server

To connect to the SPA9000 administration web server, perform the following steps.
1. Start Internet Explorer on any computer that is connected to the same network as the
SPA9000.
NOTE: You should have previously connected and configured the SPA9000 as described in
the LVS Installation Guide.
2. Enter the IP address of the SPA9000.
NOTE: You can find the IP address of the SPA9000 by connecting an analog telephone to
the Phone 1 or Phone 2 port on the SPA9000. Then lift the receiver of the phone and press
**** on the keypad to access the IVR menu. Press 110# to hear the IP address.
3. To view administrative features, click Admin Login and then click Advanced.
NOTE: By default, no password is required. For more information, see
User and Administrator Accounts, " on page
ALTERNATIVELY: After starting Internet Explorer, enter: <SPA9000_ipaddress>/admin/
advanced

Saving or Discarding Changes SPA9000

Changes can be saved or discarded at any time.
• Changes are submitted only when you click the Submit All Changes button at the bottom
of a page. When changes are saved, the SPA9000 may reboot, depending on the type of
changes.
• To discard unsubmitted changes, click the Undo All Changes button at the bottom of the
page.
• Unsubmitted changes are retained when you move among the pages within the Voice
module or the Router module. This feature allows you to make changes on various pages
within a module before clicking Submit All Changes.
• Unsubmitted changes are discarded when you switch between the Router and Voice tabs,
between the User and Administrator accounts, or between the Basic and Advanced views.
Linksys Voice System Administration Guide
Basic Administration of the SPA9000

Connecting to the SPA9000 Administration Web Server

"Connecting to the SPA9000 Administration Web Server, " on
25.
"Setting Passwords for
24