Linksys SPA9000 Administration Manual page 185

Block CID Per Call Act Code
Block CID Per Call Deact
Code
Block ANC Act Code
Block ANC Deact Code
DND Act Code
DND Deact Code
CID Act Code
CID Deact Code
CWCID Act Code
CWCID Deact Code
Dist Ring Act Code
Dist Ring Deact Code
Speed Dial Act Code
Secure All Call Act Code
Secure No Call Act Code
Secure One Call Act Code
Secure One Call Deact Code Makes the next outbound call not secure. (It is redundant if all outbound
Conference Act Code
Attn-Xfer Act Code
Modem Line Toggle Code
Linksys Voice System Administration Guide
Blocks caller ID on the next outbound call.
Default: *81
Removes caller ID blocking on the next inbound call.
Default: *82
Blocks all anonymous calls.
Default: *77
Removes blocking of all anonymous calls.
Default: *87
Enables the do not disturb feature.
Default: *78
Disables the do not disturb feature.
Default: *79
Enables caller ID generation.
Default: *65
Disables caller ID generation.
Default: *85
Enables call waiting, caller ID generation.
Default: *25
Disables call waiting, caller ID generation.
Default: *45
Enables the distinctive ringing feature.
Default: *26
Disables the distinctive ringing feature.
Default: *46
Assigns a speed dial number.
Default: *74
Makes all outbound calls secure.
Default: *16
Makes all outbound calls not secure.
Default: *17
Makes the next outbound call secure. (It is redundant if all outbound
calls are secure by default.)
Default: *18
calls are not secure by default.)
Default: *19
If this code is specified, the user must enter it before dialing the third
party for a conference call. Enter the code for a conference call.
If the code is specified, the user must enter it before dialing the third
party for a call transfer. Enter the code for a call transfer.
Toggles the line to a modem.
Default: *99. Modem pass-through mode can be triggered only by pre-
dialing this code.
Voice tab
183